User Manual

    How to use Paul Design watch winder effectively and long lasting

    User manual

    Quick Start Guide

    For the best performance, the power of your watch should be reserved (approx. 10 rounds) before putting it into the winder.

    Function Overview

    1. The rotation speed for a self-winding watch is approx.7 rounds per minute.
    2. The watch should be put vertically for the best performance.
    3. After setting, LCD screen will show the time automatically in 10 seconds.

    Directions

    The functions of Paul winders can be adjusted in 2 modes. 

    1. Automatic mode:Suitable for all watch models. The rotation speed is at 36 rounds/minute.
    2. Manual mode: The rotation speed can be adjusted as per desire.

    Safety Precautions

    Paul’s power supply design contains 5-Volt adapter.

    1. Use the plug provided with its paired winder only.
    2. Turn off the winder everytime before wearing or take off your watch.
    3. Unplug the winder everytime when not in use or after use.
    4. The winder plate should not be rotated just for fun.
    5. The winder should not be located under humidity, in dusty areas, or outdoor.

    Touch-Screen Control Panel

    1. The rotation speed for a self-winding watch is approx.7 rounds per minute.
    2. The watch should be put vertically for the best performance.
    3. After setting, LCD screen will show the time automatically in 10 seconds.

    Remote Control Function

    1. For watch setting, press O to start setting AM / PM, hours, and minutes. Press to set or adjust them as per desire.
    2. Winder setting: Press the upward and downward arrows to set the winder plate and the program you desire. After selecting the winder plate, select “RPH” (Rotation-Per-Hour). Press the upward and downward arrows to adjust setting.
    3. Suggestions for setting. 20RPH to 80RPH represents equal increase or reduction. Each particular watch has its own unique RPH setting. So, please select setting closest to yours. After that, select watch directions, i.e., clockwise, counterclockwise, or twist in 2 directions. Because each particular watch has its own unique RPH setting, please select setting closest to yours. And press “ON” to start the functions.